Help with airing cupboard wiring

Thanks again for the replies.

Ricicle you are right....

icon_thanks.gif
;)
 
Sponsored Links
I've seen 80's installations a plenty where the electrician has installed a point for connection of an immersion, but one was never fitted. Perhaps it fell down the gap in supply between the plumber and the electrician.

Two typical installation methods are shown below (earth omitted for clarity)


Try and determine which you have. If the isolator in the airing cupboard doesn't have a red indicator light on it, generally, I would expect there to be another operating switch elsewhere. Not always easy to find though. I discovered one behind a fitted kitchen in the past, and the householder didn't even know it was there. If you do have one hidden somewhere, the problem may be that it's switched off. If so there won't be any power to the airing cupboard isolator.

If you don't have the extra switch, then just swap the isolator in the airing cupboard for a fused connection unit, and connect the shower pump to that.
 
Sponsored Links

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top