Hello friends,
I'm looking to install a Hive dual channel (for CH and HW) in place of my existing British Gas Model UP2 Programmer and WR2 Wireless Receiver. I've already looked at a number of posts on this forum, but found that the wiring in my installation is different from what I've seen, so I thought it would be better/safer to post my own thread, with photos of my specific installation, and hope that someone will be able to advise me what to move and/or disconnect. I've numbered each of the wires, to easily identify the routing to/from the Wiring Centre. Thanks, in advance, for any assistance.
Wiring Centre
Wireless Receiver
Programmer
![Programmer.jpg Programmer.jpg](https://cdn.diynot.com/data/attachments/208/208187-5378c39ad130a7d2839f0b332d67c795.jpg)
I'm looking to install a Hive dual channel (for CH and HW) in place of my existing British Gas Model UP2 Programmer and WR2 Wireless Receiver. I've already looked at a number of posts on this forum, but found that the wiring in my installation is different from what I've seen, so I thought it would be better/safer to post my own thread, with photos of my specific installation, and hope that someone will be able to advise me what to move and/or disconnect. I've numbered each of the wires, to easily identify the routing to/from the Wiring Centre. Thanks, in advance, for any assistance.
Wiring Centre
![Wiring Centre.jpg Wiring Centre.jpg](https://cdn.diynot.com/data/attachments/208/208185-50bb268ed2a21a7cb8d00cc5d5290afd.jpg)
Wireless Receiver
![Wireless Receiver.jpg Wireless Receiver.jpg](https://cdn.diynot.com/data/attachments/208/208186-16fbb5a7c65b453e509b530ba4e3c54b.jpg)
Programmer
![Programmer.jpg Programmer.jpg](https://cdn.diynot.com/data/attachments/208/208187-5378c39ad130a7d2839f0b332d67c795.jpg)