I have purchased German basin/bath taps which have a much smaller aperture feed than equivalent UK taps.
Although there seems to be enough cold water pressure to produce a reasonable flow, the flow from the hot tap is very weak.
Somebody told me I should install a pump, but there don't seem to be readily available.
The hot water is produced by a conventional system and not a close system (i.e Combi).
Can anybody shed some light on this please?
Although there seems to be enough cold water pressure to produce a reasonable flow, the flow from the hot tap is very weak.
Somebody told me I should install a pump, but there don't seem to be readily available.
The hot water is produced by a conventional system and not a close system (i.e Combi).
Can anybody shed some light on this please?