Looking on the net i see this is a common problem with this machine, however i cannot find a thermostat trip switch or sure where the filters are if anyone has any advice on this please post
filter is at the back remove rear white panel its a big black cup . no themo cutout whats the fault with the heating .
Check the heater is working first it's on the heater box.
heater is the two brass round nuts on the heater box with a blue wire and pink one attacted to it.remove the two wires off the heater and test .filter is as pic a big black cup looking thing with a fat jubilee clip round it if the mc emptys ok that will not cause it to not heat ,the heater you got on that mc go all the time also check the themal fuse its the pink wire with a yellow cover round it test with a continuity tester.
http://cgi.ebay.co.uk/HOTPOINT-Washer-Dryer-WD-Heater-ELEMENT-Genuine-Spares-/370337145162?pt=UK_Home_Garden_Washing_Machines_Dryers_Parts_Accessories_ET EASY TO REPLACE UNDO NUTS, 6 BOLTS ON HEATER BOX, THEN 8 BOLTS TO SPLIT HEATER BOX .
no its a diffent heater ,found at the back next to the filter.
http://cgi.ebay.co.uk/HOTPOINT-Washer-Dryer-WD-Heater-ELEMENT-Genuine-Spares-/370337145162?pt=UK_Home_Garden_Washing_Machines_Dryers_Parts_Accessories_ET EASY TO REPLACE UNDO NUTS, 6 BOLTS ON HEATER BOX, THEN 8 BOLTS TO SPLIT HEATER BOX .
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local