Hi all,
Got a problem in our kitchen where I found a 2-gang socket on the ring
final has 2 spurs from it. One is to an FCU for an outside light & timer
and the other is to an FCU for a combi-boiler.
[ The one to the combi-boiler also spurs off to feed the
ignition for the gas hob, but under the worktop just protrudes
a small length of 2.5mm T&E with a choc block. ]
My concern is the amount of wires in the back of the socket
providing the spurs. What would be the best solution to this?
Cheers,
Pete
Got a problem in our kitchen where I found a 2-gang socket on the ring
final has 2 spurs from it. One is to an FCU for an outside light & timer
and the other is to an FCU for a combi-boiler.
[ The one to the combi-boiler also spurs off to feed the
ignition for the gas hob, but under the worktop just protrudes
a small length of 2.5mm T&E with a choc block. ]
My concern is the amount of wires in the back of the socket
providing the spurs. What would be the best solution to this?
Cheers,
Pete