Idesit WI 101

[Pugwash76]

oh well here we go again thannks darling i think you've killed anutha 1

jezus women and washing machines this may be the 3rd dead 1 in 5 years



oh hi every1 sorry off at a Tangent again

okidoki had a Browse of the forums in here 1st

got a Indesit wi 101

Noisy as hell when loaded going through the spin cycle

run the machine without any load inside on a full spin cycle it almost sounds normal, apart from a tick tick tick sound coming from the side of the machine somewhere

tried lifiting the drum up and down it doesn't move at all so hopefully the bearings ain't shot

machine is just under 2 years old used 6 out of 7 days (so like god it gets a days rest) never overloaded no leaks no dust on clothes just a quite Noisy on the full spin cycle only

so up for a few ideas before i rip it apart

ta for any help

 

[breezer]

people alwys say they never overload it (but they often do)

spin it by hand is it noisey?

if yes bearings gone

if no coin stuck between inner and outer drums

 

[Pugwash76]

nope quite as a church lamb if u spin by hand

ta for info i'll hav a look inside

blimey if it's a £1 i'll do the lottery

 

[breezer]

to get coin out is easy

UNPLUG M/C FIRST

find which end pump is (thats the hard bit)

remove pump and go in that way.

you can figure out the rest

 

[fido]

Check if the concrete blocks have come loose.