- Joined
- 7 Jun 2023
- Messages
- 10
- Reaction score
- 0
- Country
I have moved into a new flat. It is fully electric.
I have a Heatrae Sadia Megaflo tank with immersion heaters (top and bottom).
There is a separate Timeguard NTT05 timer for each heater.
I'm trying to figure out how it works.
It seems that no matter the switch setting (timer, on or off) the immersion will fire whenever I use hot water - the smart meter reading shoots up 30 seconds after running some hot water at full blast.
Does this mean the timers are redundant and the immersion will fire whenever I use hot water?
I have a Heatrae Sadia Megaflo tank with immersion heaters (top and bottom).
There is a separate Timeguard NTT05 timer for each heater.
I'm trying to figure out how it works.
It seems that no matter the switch setting (timer, on or off) the immersion will fire whenever I use hot water - the smart meter reading shoots up 30 seconds after running some hot water at full blast.
Does this mean the timers are redundant and the immersion will fire whenever I use hot water?