Hello gents, I hope you are all well and can I thank you in advance for your help... plus I can't find the model number for this beauty, data plate removed...
it's the electric side of it. It's tripping the RCD after 5 minutes of the oven trying to heat up the element. the element is trying to get hot but it's not, getting slightly warm. I've tested the element and:
There is continuity
resistance is around 28.5ohms
but there is no 240v through the connections of the element. I've checked all the leads and connections and they are showing continuity, it has to be a blown element maybe?
Cheers for guidance.
Adamsheating.
it's the electric side of it. It's tripping the RCD after 5 minutes of the oven trying to heat up the element. the element is trying to get hot but it's not, getting slightly warm. I've tested the element and:
There is continuity
resistance is around 28.5ohms
but there is no 240v through the connections of the element. I've checked all the leads and connections and they are showing continuity, it has to be a blown element maybe?
Cheers for guidance.
Adamsheating.