Well... I recently got my machine fixed but there it goes again.... I guess I was happy too soon. -_-
My wash/dry machine turns on like always and I don't get any error flash lights. I select the program I want it to run and it starts normal. It first lets water run through the pre-wash detergent section and stops, then it lets water run through the actual detergent section and starts turning the drum, however it does not stop! The water keeps on running even if my laundry got too heavy to be able to turn the drum; in addition to that I see the water-level rise unusually from the window on the door. Luckily I was able to stop the machine, and I put it on the "drain program" to empty the water from the drum.... I've repeated this several times and the same error occurs over and over again.. it does not stop filling the machine and therefore can't go to the next step either. Later I also noticed that the water was leaking at the left side of the machine (from my perspective). I opened up the back of the machine and it seems to be leaking from the thermostat... which is very awkward. Not sure if that is the only place it was leaking from.
I've recently had a faulty board (broken heater relay error), which I got fixed (replaced relay and capacitor), so I don't think it is another fault on it...
Hope you guys can help me out with this
My wash/dry machine turns on like always and I don't get any error flash lights. I select the program I want it to run and it starts normal. It first lets water run through the pre-wash detergent section and stops, then it lets water run through the actual detergent section and starts turning the drum, however it does not stop! The water keeps on running even if my laundry got too heavy to be able to turn the drum; in addition to that I see the water-level rise unusually from the window on the door. Luckily I was able to stop the machine, and I put it on the "drain program" to empty the water from the drum.... I've repeated this several times and the same error occurs over and over again.. it does not stop filling the machine and therefore can't go to the next step either. Later I also noticed that the water was leaking at the left side of the machine (from my perspective). I opened up the back of the machine and it seems to be leaking from the thermostat... which is very awkward. Not sure if that is the only place it was leaking from.
I've recently had a faulty board (broken heater relay error), which I got fixed (replaced relay and capacitor), so I don't think it is another fault on it...
Hope you guys can help me out with this