I have just purchased a kenwood KHC604 induction hob to replace my Samsung ceramic hob that has just died,
the sockets behind the hob / oven are -
hard wired for the hob
plug / socket for the cooker
both of these are linked to the switch above the work surface,
I assume that I can just replace the old ceramic hob with the induction with no issues ?
im also a little confused by the wiring diagram,
My from hard wired point I have 1 x L /1 x N / 1 x E
My assumption is that I use the diagram -
220-240 v as I only have 1 x L,
the other 2 diagrams indicate 2 x L or 3 x L,
Any help would be much appreciated
the sockets behind the hob / oven are -
hard wired for the hob
plug / socket for the cooker
both of these are linked to the switch above the work surface,
I assume that I can just replace the old ceramic hob with the induction with no issues ?
im also a little confused by the wiring diagram,
My from hard wired point I have 1 x L /1 x N / 1 x E
My assumption is that I use the diagram -
220-240 v as I only have 1 x L,
the other 2 diagrams indicate 2 x L or 3 x L,
Any help would be much appreciated