I've got 5x low bay induction light fittings on my workshop roof (200w each) that I replaced the old 400w SON ones with...
All 5 are wired in to a C6 MCB but every so often when turning them on the breaker trips???
Surely 5x 200w fittings won't make a C6 breaker trip?
It's a Eaton Memshieldo 3 board and breaker and all fittings are connected using plug in ceiling roses.
Any ideas?
All 5 are wired in to a C6 MCB but every so often when turning them on the breaker trips???
Surely 5x 200w fittings won't make a C6 breaker trip?
It's a Eaton Memshieldo 3 board and breaker and all fittings are connected using plug in ceiling roses.
Any ideas?