Intatec Pressure Reducing Valve.

[b3ak3r]

I'm after a Pressure Reducing Valve 15mm compression with Gauge made by Intatec but can't find anywhere that stock it. Does anyone have any suggestions?

PRV22331510
SPECIFICATION

Adjustable pressure range: 0.5 - 6 bar
Factory set pressure: 3 bar
Max inlet pressure static: 16 bar
Maximum inlet temperature: 80°C

 

[Charnwood]

Does it have to be that exact model/spec?

Altecnic 533841:
1 - 6 bar
max temp 65°C
max inlet 12bar

Both will be (I'm 99.999999% certain) made by Caleffi in Italy.

There's a distributor in Nottingham who stock the 533841, but they also stock Intatec products. Not the PRV22331510, but they will order it in.

Quite a few merchants in the South Yorks area have accounts.
Ogley Brothers, Plumco, PTS, Plumbase.

 

[Madrab]

Hi Again baker - if you look under inta, rather than intatec you'll find them -

http://www.advancedwater.co.uk/header-263-467-PRV2233GAUGE.html

 

[Charnwood]

Well found, Madrab.

Seems a reasonable price, too.

 

[b3ak3r]

Thanks Madrab, that's where I found them as well. Just was hoping to find them somewhere local. Looks like i'll need to bite the bullet and get them posted out.

With regards the other valve I need to get down to .5 at the outlet to be within the tolerance level of the taps.

Thanks again.

 

[Madrab]

Try calling Spinks, I believe they may deal with Inta, they have a place in Halfway

http://plumbing.aespink.com/

 

[Charnwood]

Aaahh, low pressure taps on a high pressure system.