Hi,
Just bought 9 internal 4 panel moulded doors 1981 x 762 x 35.
It says on the packaging that you can plane a maximum of 6mm off the bottom and none off the top.
Problem is at least 3 of my doors will need about 11mm trimmed off the bottom.
Could anybody please tell me whether this will cause me any problems ie. door warping etc.
Many thanks
Just bought 9 internal 4 panel moulded doors 1981 x 762 x 35.
It says on the packaging that you can plane a maximum of 6mm off the bottom and none off the top.
Problem is at least 3 of my doors will need about 11mm trimmed off the bottom.
Could anybody please tell me whether this will cause me any problems ie. door warping etc.
Many thanks
