I have a coffee machine with and integral boiler. Is it possible to test the operation of the boiler with a multimeter. Continuity or something like that? Is the element working - that's what I need.Thanks for your help
Yes you can test the element if your mutimeter has an ohms setting.
If it reads infinity or open circuit or zero then it's probably goosed. A rough guestimate of the reading you should get assuming a 2kW heater would be 30 ohms but anything between about 15 and 100 would suggest it's OK.
Two further questions. Which measuring scale should i use on the multimeter and as matter stand when I set the multimeter to resistance it shows 1. What ever scale I use it remains on 1
If you need to find a tradesperson to get your job done, please try our local search below,
or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Please select a service and enter a location to continue...
Are you a trade or supplier? You can create your listing free at DIYnot Local