Hi. Can anyone give me some advice on how to lead flash my New Project
Lean-to roof. Have tried to do the flashing but when I insert the lead into the
mortar gap and fix with lead wedges, I then start to tap out over the ridges of the double roman tiles, the lead just pulls out of the wall at each end and makes the lead strip into a curve. The pieces of lead are about 1 - 1.5 in length.
Any help would be much appreciated.
Lean-to roof. Have tried to do the flashing but when I insert the lead into the
mortar gap and fix with lead wedges, I then start to tap out over the ridges of the double roman tiles, the lead just pulls out of the wall at each end and makes the lead strip into a curve. The pieces of lead are about 1 - 1.5 in length.
Any help would be much appreciated.