I'm expecting you all to throw your hands up in the air when you hear my amateurish questions. However here goes,, but some background first.. I have the above shower which was fitted by a pro 3 years ago.The shower is aok.... But remote from the shower room and on the landing I have a lit on/off 2gang 2pole 45amp switch fitted and this has seized up in the ON position but it still works.. Anyway I decided to replace it and discovered that the old cables were a bit charred,so I pulled some more of the feed and load cables through and cut back to good and re-terminated them... I replaced the old switch(a generic type) with a Volex 45A 2gang 2pole with neon light.. Now call me old fashioned but I would have thought that when the switch was OFF that the neon light would be off too and vica-versa ,but no, it is on all the time but it works the shower.. Have I done something wrong or is that how it's supposed to be?... the thought has crossed my mind that maybe I have connected the feed to the load in the switch connections but I'm frightened to try them the other way around in case I reinvent break-dancing again like I did in the 60's when I tried to switch on a live socket in the pitch black whilst having a slash in a Victorian mansion.. Anyway any help would be much appreciated... regards JJ