- Joined
- 23 Nov 2017
- Messages
- 15
- Reaction score
- 0
- Country
Hoping for some help on diagnosing a Mira shower. Mira Sport 9kW
2 days ago it started cutting out after about 10 minutes of running. First the low flow light comes on, then the water shuts off. I'm pretty confident it's not a water flow issue. Mains pressure and have tried turning on all the taps in the house and the shower still runs.
Tonight I tested it with no hose attached and it was cutting out after 2-3 minutes on hot and cold. in my understanding this rules out the overheating sensor?
Inside the shower there are 2 little grey switches which move levers which I believe control the water supply. These positively move when it comes on/off meaning it's definitely the shower switching itself on/off.
Any thoughts/ideas if this is repairable? Any ideas of things I could try/test?
Much appreciated.
2 days ago it started cutting out after about 10 minutes of running. First the low flow light comes on, then the water shuts off. I'm pretty confident it's not a water flow issue. Mains pressure and have tried turning on all the taps in the house and the shower still runs.
Tonight I tested it with no hose attached and it was cutting out after 2-3 minutes on hot and cold. in my understanding this rules out the overheating sensor?
Inside the shower there are 2 little grey switches which move levers which I believe control the water supply. These positively move when it comes on/off meaning it's definitely the shower switching itself on/off.
Any thoughts/ideas if this is repairable? Any ideas of things I could try/test?
Much appreciated.