Swapping existing radiator for traditional type towel radiator and as pipe centres are closer on new rad and I want to keep it central under the window I need to move supply for one valve the other side of a joist below.
Looking at the joist in question there is suitably sized hole already in it right where I need to move the supply. Only issue I see is it's in the last .25 of the joist (almost at eend of joist).
Do I just go the easy route and use existing hole or patch up hole with ply and make new hole in recommended zone? Thinking another hole is a bad idea..
Looking at the joist in question there is suitably sized hole already in it right where I need to move the supply. Only issue I see is it's in the last .25 of the joist (almost at eend of joist).
Do I just go the easy route and use existing hole or patch up hole with ply and make new hole in recommended zone? Thinking another hole is a bad idea..