Mysterious problem

[AnonymousImport]

I recently removed the fused junction box and transformer that powered my old front door bell...it was in an upstairs bedroom. I replaced it with a normal twin plug socket.

But now my wall lights in my downstairs extension do not work......what could be causing this problem??? any suggestions

 

[AnonymousImport]

the lights must have been powered from where you removed the box :eyes

 

[AnonymousImport]

yes, but i replaced the box with a plug which works and wired everything else up...could the circuit now be overloaded?

 

[AnonymousImport]

i would check the wiring to make sure you got it right it sounds like you might have a wire in the wrong place :eyes

 

[AnonymousImport]

if i undestand u correctly, u have replace a junction box with a socket. This is not safe as j.b {suplying bell}is fused at 5a . sockets are fused at 32a[ring main]

 

[DNADECORATING]

DID YOU DRILL THROUGH THE CABLE TO UR LIGHTS?