Nail gun or heavy duty staple gun for 25 mm pins

[RepairingDave]

Does anyone know what the biggest size pins/nails a staple gun can take?

I have considered getting a new staple gun as the one I have is broken/worn and can be unreliable.
I also have loads of boxes of 16 gauge x 25 mm long pins/nails, so it makes sense to get a new one that allows me to use these.

I would prefer a hand stapler, but if this is not possible I would consider electric.

Can anyone offer any advise or suggestions.

Thanks in advance.

 

[Tigercubrider]

I don't know, but a 25mm staple/pin is going to take a lot of energy even in softwood.
I'd buy a cheap air or mains pin gun.
there may be battery ones at a cheap price but our battery makitas cost an arm and a leg

 

[RepairingDave]

I don't know, but a 25mm staple/pin is going to take a lot of energy even in softwood.
I'd buy a cheap air or mains pin gun.
there may be battery ones at a cheap price but our battery makitas cost an arm and a leg

Thanks for the reply.
I don't want to go down the air gun route as I don't have a compressor.
The cheapest mains powered ones only take shorter pins.
I might be separating them to hammer in by hand or they will be making an appearance on ebay soon.