Neff oven and hob connecting question.

[LucasB]

I have a Neff U17M42(double oven) and a Neff T12D20(hob) arriving next week and I would like to know if I can connect them both to the existing Control unit or do they need seperate supplies from the Consumer Unit? I have tried to find out there power ratings off the internet but not sure I have the right answer. I think the oven is 4.9Kw and the hob is 6.6Kw making them 11.5Kw. They are a total of 6 meters from the Consumer unit and less than a meter from the control unit.

I would rather not have to put in a new line all the way back to the consumer unit and need to know what size cable I require for the consumer to control connection and then from that to each connection point.(they will have seperate connection points after the control unit.

Please help...

Lucas

 

[ban-all-sheds]

• http://www.bs7671explained.com/17thEdition_Diversity.html
  
• //www.diynot.com/forums/viewtopic.php?p=81696#81696
  
• http://www.tlc-direct.co.uk/Book/4.3.1.htm
  
• http://web.archive.org/web/20080213151445/http://www.kevinboone.com/cableselection_web.pdf
  
• http://www.tlc-direct.co.uk/Technical/Charts/VoltageDrop.html
  
• //www.diynot.com/wiki/electrics:part-p[/list]

 

[holmslaw]

..