- Joined
- 30 Apr 2012
- Messages
- 4
- Reaction score
- 0
- Country
Lower spray arm is free from blockage and rotates freely by hand. Upper arm rotates fine in the wash cycle, but the lower arm stays stuck. If I temporarily block the upper arm outlet, water does emanate from the lower arm but not enough force to spin it.
I suspect the diverter valve in the Instantaneous water Heating unit is stuck. I've used a dishwasher cleaning thingy on hottest temp, but still no good.
How easy is it to replace? Is it do-able for a DIY-er of reasonable skills?
Are there any instructions for this job? Or do you recommend an engineer to do it?
Or could it be another problem?
Thanks.
I suspect the diverter valve in the Instantaneous water Heating unit is stuck. I've used a dishwasher cleaning thingy on hottest temp, but still no good.
How easy is it to replace? Is it do-able for a DIY-er of reasonable skills?
Are there any instructions for this job? Or do you recommend an engineer to do it?
Or could it be another problem?
Thanks.