Good evening,
My 105e DHW is fine but CH is none existent. None of the failure lights are on and the pressure is constant at 1.5 bar.
The pushrods on the diverter both engage the micro switches, so I guess the diaphrams are ok(?), but no CH.
The boiler will not reset when I turn the switch to the reset position so maybe the selector switch is faulty(?)
The boiler is being temporarily controlled by the dials on board until we connect it up to a roomstat after the building work we are having done is finished.
The boiler was here when we moved in so I don't have any info beyond 8 weeks ago.
Any information would be very welcome.
Thanks,
Dave.
My 105e DHW is fine but CH is none existent. None of the failure lights are on and the pressure is constant at 1.5 bar.
The pushrods on the diverter both engage the micro switches, so I guess the diaphrams are ok(?), but no CH.
The boiler will not reset when I turn the switch to the reset position so maybe the selector switch is faulty(?)
The boiler is being temporarily controlled by the dials on board until we connect it up to a roomstat after the building work we are having done is finished.
The boiler was here when we moved in so I don't have any info beyond 8 weeks ago.
Any information would be very welcome.
Thanks,
Dave.