Overboarding

Joined
18 Apr 2006
Messages
7
Reaction score
0
Location
London
Country
United Kingdom
Hello

If I overboard my ceiling (currently seems to be made of thick cardboard, no plaster), will I be best off using screws? If so, what are they called and what size? I have to use quite light and small bits of plasterboard as I am a girl and lack the neccessary arm strength.
 
Sponsored Links
Hi,

Yes, definately best using screws instead of nails.

You're looking out for drywall screws. Usually black.

You could do with at least 50mm screws I reckon so that you go through the new board, through the existing board and penetrate a good bit into the joists above.

Get yourself a support prop or two. Only £10 - £15 each (one's usually enough anyway) so you can get your board into place and prop it up making screwing easier.

Make sure you stagger the joints to prevent continuous crack when skimmed and also tape all joints properly with scrim tape.

Good luck.
 
Thanks Fred,

Sound advice.

Strangely I had never thought of support props, its mostly been brooms.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top