- Joined
- 4 Jun 2004
- Messages
- 1
- Reaction score
- 0
- Country
Hi Folks,
I have a Potterton Combi 80, recently it has been failing to ignite for both CH and HW, when you switch it on the pump starts but there is no ignition. The same happens when you turn on the tap the red light on the PCB comes on but no ignition. The other thing is this seems to be an intermittent problem because if you leave it and try it again later or the next day it works fine, then couple of days later it won't ignite again.
Any help appreciated.
Thanks,
Ali.
I have a Potterton Combi 80, recently it has been failing to ignite for both CH and HW, when you switch it on the pump starts but there is no ignition. The same happens when you turn on the tap the red light on the PCB comes on but no ignition. The other thing is this seems to be an intermittent problem because if you leave it and try it again later or the next day it works fine, then couple of days later it won't ignite again.
Any help appreciated.
Thanks,
Ali.