Potterton flamingo 20-30 boiler

[erion]

My potterton flamingo boiler timmer was working fine but the time was not correct so I ajust it to the wright time turning the dial clockwise. Since then the boiler stays always ON when I select the timing option, turning the selector nob in position 3&4 (once or twice a day for HW and Heating). Heating stops when the selctor nob is in position 1&2 as it should.
Any advice will be much appreciated.

 

[75pete]

Try resetting the time a couple more times as it could be dirty connections

 

[JohnD]

if you keep having trouble with it, take a photo of the programmer and post it on here. Many programmers are on a standard plug-on backplate and it is easy to replace them with a compatible model.

//www.diynot.com/forums/viewtopic.php?t=129539

View media item 3553

 

[erion]

Try resetting the time a couple more times as it could be dirty connections

Hi 75Pete,
Thanks for your comment. What do you mean resetind it?....I have turn the dial programer full clockwise a couple of times. Is there another way of reseting i?

 

[erion]

if you keep having trouble with it, take a photo of the programmer and post it on here. Many programmers are on a standard plug-on backplate and it is easy to replace them with a compatible model.

//www.diynot.com/forums/viewtopic.php?t=129539

View media item 3553

Hi JohnG,
Thanks for your coment. Please find a pic of the programer in my album....
//www.diynot.com/network/erion/albums/

Cheers