Hi All,
Please can someone help. I'm trying to connect a Heatmiser PRT-TS to a Potterton Gold HE, as per the title. I've followed the instructions for both, but to no avail.
The stat is on, and I can hear the relay click inside it to switch on, but the boiler never fires. I've removed the bridging cable and the internal timer in the boiler.
Any ideas?
http://www.heatmiser.com/index.php/...finish/69-english/447-heatmiser-prt-ts-manual
http://www.potterton.co.uk/docs/7202085-05_install_Gold.pdf
These are the 2 manuals.
It mentions in there about bridging the live and A1 on the thermostat. I haven't done this, as I wasn't sure if I needed to and didn't want to break it. If you could answer this, it may be the key.
Please can someone help. I'm trying to connect a Heatmiser PRT-TS to a Potterton Gold HE, as per the title. I've followed the instructions for both, but to no avail.
The stat is on, and I can hear the relay click inside it to switch on, but the boiler never fires. I've removed the bridging cable and the internal timer in the boiler.
Any ideas?
http://www.heatmiser.com/index.php/...finish/69-english/447-heatmiser-prt-ts-manual
http://www.potterton.co.uk/docs/7202085-05_install_Gold.pdf
These are the 2 manuals.
It mentions in there about bridging the live and A1 on the thermostat. I haven't done this, as I wasn't sure if I needed to and didn't want to break it. If you could answer this, it may be the key.