I'm changing a bathroom with mains pressure cold and low pressure hot via loft tanks and hot water cylinder.
Would ideally like to get decent shower head pressure where hot and cold are equal.
Is it an option to isolate the bath hot and increase pressure via a pump leaving the other side of the pump dry?
I believe that water regs require that the hot and cold feeds to a pump have to be equal - it's a right bastard this one, the HWC is in the central core of the house, so can't get a pressure blow off out if fitting a megaflow. Really running short of options that don't require pulling the whole house to bits.
Would ideally like to get decent shower head pressure where hot and cold are equal.
Is it an option to isolate the bath hot and increase pressure via a pump leaving the other side of the pump dry?
I believe that water regs require that the hot and cold feeds to a pump have to be equal - it's a right bastard this one, the HWC is in the central core of the house, so can't get a pressure blow off out if fitting a megaflow. Really running short of options that don't require pulling the whole house to bits.