I have an avira go power shower and while in it the other day, it cut out. The fuse has not tripped, the cable is all still intact, there is no water in the shower and there is obviously still power in the house!
I fitted the shower myself (it was checked over my an electritian) and I have looked at the fuseboard and everything is still dene up tight etc etc. I have opened the isolator and that seems all wired and fine.
I can normally sort out most of my DIY problems but I am at a total loss here.
Any help would be most appreciaited.
I fitted the shower myself (it was checked over my an electritian) and I have looked at the fuseboard and everything is still dene up tight etc etc. I have opened the isolator and that seems all wired and fine.
I can normally sort out most of my DIY problems but I am at a total loss here.
Any help would be most appreciaited.