I had to buy a switch to replace the old one.The markings on the old one were L1,L2 & L3. The new one is L1,L2 & COM. As I don't know anything about electricity I naively assumed L3 = COM.A big mistake. After 14 hrs I got the lights working but not correctly. It is a switch plate with 3 2-way switches.One is required as a 2-way switch, the other 2 are used only as 1-way switches.The two 1-way switches are working fine when the 2-way is in the OFF position.This 2-way switch can be then controlled from the other switch downstairs. But when the 2-way switch is ON, then all three bulbs controlled by the 3 switches come on together.
Another problem is, for the 3 lights, 6 wires are in red.One is blue and one is yellow.
Can someone please advice what to do?Thanks
Another problem is, for the 3 lights, 6 wires are in red.One is blue and one is yellow.
Can someone please advice what to do?Thanks