Pyronix enforcer: false alarms

[secureiam]

the door should be e/e (delay), and the pir facing the door should be a walk through zone (interor follower i believe but would have to double check the zone types).

this means if the system is being set or in entry the pir would do nothing in effect. but if the system was set and the pir was triggered it would go into alarm.

 

[gtpassay]

the door should be e/e (delay), and the pir facing the door should be a walk through zone (interor follower i believe but would have to double check the zone types).

this means if the system is being set or in entry the pir would do nothing in effect. but if the system was set and the pir was triggered it would go into alarm.

Great, got you! I think that is what happens - I have a delay when I enter the house but when I set it and walk in from a room without a sensor then the alarm goes off immediately. Thanks again!