Is this suitable with the 6mm cable which is fitted to the c.u.Your option would be to fit a separate, stand alone RCD on the outgoing conductors of the circuit concerned.
Or a separate cu for the shower.
Eg https://www.tlc-direct.co.uk/Products/WYNMRS206slash63.html
Which option are you talking about?Is this suitable with the 6mm cable which is fitted to the c.u.
Hi , does anyone know if there is a r c b o suitable for a shower that would fit into a MERLIN GERIN MGPK12 , SEE PHOTO
Thats what i thought, if there C60 range Mcbs then Schneider Acti 9 mcbs surely fit, so why not a Rcbo, or is the boards casing smallerI am quite certain Schneider will fit that.
Thanks guys, I've decided to get a new C.U. Thanks all for your inputThe board is too small to accommodate any merlin / Schneider RCBOs
Were there later versions of that board that had the DIN rail higher up? I'm sure I've fitted RCBOs to very similar merlin boards but can see that it wouldn't fit in the one in the pictureThe board is too small to accommodate any merlin / Schneider RCBOs
Were there later versions of that board that had the DIN rail higher up? I'm sure I've fitted RCBOs to very similar merlin boards but can see that it wouldn't fit in the one in the picture
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local