Hi All
Bit of advice please.
Just bought a new light fitting for a bedroom but just want to make sure im wiring it correctly.
Old ceiling rose has 2 - Cables (2 red,2 Black, 2 earth) I presume this is the last light on the loop.
New fitting has block with space for L E N & spare at the end.
Unsuprisingly for my house there is no mark on the cable for switch live - So having traced the cable through the loft ive identified which cable is going to the switch and the black wire is in the Com port in the switch. Am i correct in saying this is therefore the switch live?
New fitting would be as follows then..
Black from switch cable in L port
Black from circuit in N port
2 Green/Yellow in E port
2 remaining reds in spare to link loop.
Many thanks
Bit of advice please.
Just bought a new light fitting for a bedroom but just want to make sure im wiring it correctly.
Old ceiling rose has 2 - Cables (2 red,2 Black, 2 earth) I presume this is the last light on the loop.
New fitting has block with space for L E N & spare at the end.
Unsuprisingly for my house there is no mark on the cable for switch live - So having traced the cable through the loft ive identified which cable is going to the switch and the black wire is in the Com port in the switch. Am i correct in saying this is therefore the switch live?
New fitting would be as follows then..
Black from switch cable in L port
Black from circuit in N port
2 Green/Yellow in E port
2 remaining reds in spare to link loop.
Many thanks