Hi all and thanks in advance for any advice you can give me.
I currently have an old GEC X6036 main switch in my garage running a lighting circuit and 1 double power point at the far end of the garage.
I am looking at adding an extra double power point near the main box and an external double socket such as this one plus running a power supply to my shed.
As this box has the old fashioned ceramic fuses I was looking at upgrading it but am getting somewhat confused as to what I need, so should I just continue using my current box and run the shed lights and external socket from the 2 fuses that are not currently being used and put a junction box on the existing power circuit for the extra internal socket?
I currently have an old GEC X6036 main switch in my garage running a lighting circuit and 1 double power point at the far end of the garage.
I am looking at adding an extra double power point near the main box and an external double socket such as this one plus running a power supply to my shed.
As this box has the old fashioned ceramic fuses I was looking at upgrading it but am getting somewhat confused as to what I need, so should I just continue using my current box and run the shed lights and external socket from the 2 fuses that are not currently being used and put a junction box on the existing power circuit for the extra internal socket?
Links in this post may contain affiliate links for which DIYnot may be compensated.