Am wishing to replace an old Ceiling light that is on a 2 way circuit.
The Wiring at present is
2 Reds (Joined together)
2 Blacks (seperate)
2 Earths Cut Back to Sleeve.
The old lampholder had 3 terminals with the 2 Reds together and the
2 Blacks in 1 Terminal each.
My new Lamp fitting is a Bronze Metal Spot with a terminal Block with 3
terminals. 1 Live (Red) 1 Black (Neutral) and 1 Green (Earth)
Can anyone advise how to wire up, I know the 2 Reds go together and
the Earths, Problem is the Blacks.
The Wiring at present is
2 Reds (Joined together)
2 Blacks (seperate)
2 Earths Cut Back to Sleeve.
The old lampholder had 3 terminals with the 2 Reds together and the
2 Blacks in 1 Terminal each.
My new Lamp fitting is a Bronze Metal Spot with a terminal Block with 3
terminals. 1 Live (Red) 1 Black (Neutral) and 1 Green (Earth)
Can anyone advise how to wire up, I know the 2 Reds go together and
the Earths, Problem is the Blacks.