Hi everyone.
I am trying to repalce the room thermostat.
We have a Worster Combi Boiler. I want to replace the thermostat simply coz the plastic cover on the old one is broken.
However I need some help working out the wiring.
The old thermostat is the Sunvic TLX 2259
Ive found a wiring diagram at http://www.tlc-direct.co.uk/Technical/DataSheets/Sunvic/TLX.pdf
I struggled to work out which new thermostat i needed. I wasnt after a digital one, just a bog standard white plastic jobby.
I went for a Drayton Combi Stat RTS8
The instructions say i need a 3 wire setup. This should be ok as there are three wires connected to terminals in the old room stat.
The instructions say there should be a Live, Neutral and 'N Load'
Any help on if i do actually have the correct replacement and which wires should go where.
Thanks
Chris
I am trying to repalce the room thermostat.
We have a Worster Combi Boiler. I want to replace the thermostat simply coz the plastic cover on the old one is broken.
However I need some help working out the wiring.
The old thermostat is the Sunvic TLX 2259
Ive found a wiring diagram at http://www.tlc-direct.co.uk/Technical/DataSheets/Sunvic/TLX.pdf
I struggled to work out which new thermostat i needed. I wasnt after a digital one, just a bog standard white plastic jobby.
I went for a Drayton Combi Stat RTS8
The instructions say i need a 3 wire setup. This should be ok as there are three wires connected to terminals in the old room stat.
The instructions say there should be a Live, Neutral and 'N Load'
Any help on if i do actually have the correct replacement and which wires should go where.
Thanks
Chris