Underneath my yucky lino in my kitchen are beautiful quarry tiles - but they appear to have had a layer of cement over them (only about 1mm thick) how can i best restore them?
restoring quarry tiles
- Thread starter HannahB
- Start date
Sponsored Links
- Joined
- 14 Mar 2005
- Messages
- 5,777
- Reaction score
- 30
- Country
You can get brick acid ond use that on them..make sure the room is well ventilated and you were gloves and goggles etc..
When you have cleaned them up rinse them and allow to dry..there are various sealers out there personally I find rubbing in a coat of boiled linseed oil thinned by about 30% with white spirit..then a coat of beeswax and buff with a electric buffer
When you have cleaned them up rinse them and allow to dry..there are various sealers out there personally I find rubbing in a coat of boiled linseed oil thinned by about 30% with white spirit..then a coat of beeswax and buff with a electric buffer
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
