My roof is currently being re-done. The felt is being replaced with Roofshield membrane, new batons and new tiles. The house is a standard 3-bed 1930's semi with pitch roof and concrete tiles.
The Roofshield has been laid and batons fixed and the new tiles are partially fitted. My question is about where my roof joins the neighbours. On the front of the house the roofshield covers the roof completely - going under the neighbours tiles. However, at the back there seems to be a strip between my roof and the neighbours where there is no Roofshield membrane covering (this would be above the wall between the two houses). My concern is that is rainwater gets under the tiles here it will leak into the walls.
I have attached photos of the front of the roof which is covered as I would expect and the gap at the back.
I will ask the roofer about this in the morning but it would be really useful to get some advice.
Thanks in advance.
The Roofshield has been laid and batons fixed and the new tiles are partially fitted. My question is about where my roof joins the neighbours. On the front of the house the roofshield covers the roof completely - going under the neighbours tiles. However, at the back there seems to be a strip between my roof and the neighbours where there is no Roofshield membrane covering (this would be above the wall between the two houses). My concern is that is rainwater gets under the tiles here it will leak into the walls.
I have attached photos of the front of the roof which is covered as I would expect and the gap at the back.
I will ask the roofer about this in the morning but it would be really useful to get some advice.
Thanks in advance.