Hi
Have taken on the challenge of fitting a No-Ha invisible door opening mechanism. Got 90% of the way there, but the last hurdle is to rout out a 40mm x 16mm deep recess, leaving 4mm either side of the door face.
Hopefully the attached pic will make this clear.
I have routed out the initial big opening (45mm x 87mm) ... but have no idea what kind of router bit to order so that I can gouge out 16mm of wood (just leaving 4mm untouched!). The handle manufacturers suggest buying one of their 'specialist' tool bits ... but they are asking 200 euros for it! For a one off door that is crazy, so I was thinking maybe one of you geniuses may be able to help me ... THANKS!
Have taken on the challenge of fitting a No-Ha invisible door opening mechanism. Got 90% of the way there, but the last hurdle is to rout out a 40mm x 16mm deep recess, leaving 4mm either side of the door face.
Hopefully the attached pic will make this clear.
I have routed out the initial big opening (45mm x 87mm) ... but have no idea what kind of router bit to order so that I can gouge out 16mm of wood (just leaving 4mm untouched!). The handle manufacturers suggest buying one of their 'specialist' tool bits ... but they are asking 200 euros for it! For a one off door that is crazy, so I was thinking maybe one of you geniuses may be able to help me ... THANKS!