The circiut with the problem is a radial supplying 13a sockets, wired in 2.5mm twin, at the consumer unit the breaker is a cet 32a mcb.
Everything was working fine, plugged the kettle in , after a minute the kettle stop working,
thought the mcb had tripped went to comsumer unit and mcb had not tripped.
Metered the socket and 240v between L/E ,240V between N/E and 0v between L/N.
Before this happened everything had worked fine , nothing had been touched and it's the same kettle used many times.
now none of the sockets on the circuit work at all.but all have the same meter readings as above
All the other circuits in the house are working fine
Everything was working fine, plugged the kettle in , after a minute the kettle stop working,
thought the mcb had tripped went to comsumer unit and mcb had not tripped.
Metered the socket and 240v between L/E ,240V between N/E and 0v between L/N.
Before this happened everything had worked fine , nothing had been touched and it's the same kettle used many times.
now none of the sockets on the circuit work at all.but all have the same meter readings as above
All the other circuits in the house are working fine