triton rapide 4 shower low pressure light , after 1 yr

[shazzybabe]

Apologies if this is in the wrong place.
I have a Triton rapide 4 shower which has been fine for almost 1 Yr, but yesterday the low pressure light came on and it switched to cold only. Any clues, the manual is unhelpful, as it only recommends for installation.
It is plumbed into the mains and has the isolated cut of switch thing.
Could it be a blocked inlet filter??

 

[Triton]

The inlet filter could be blocked and should be checked before you request an engineer from triton. But it is also possible that the printed circuit board has a weak microswitch causing this fault.

 

[shazzybabe]

Hi and thanks,
The inlet filter is clear, got it checked today. Its most confusing it has been fine for one year. It sis still under warranty too.

 

[DESL]

If I remember correctly Triton Showers have a thermal cut off valve which once it's operated cannot be reset.

have a look at http://www.tritonshowers.co.uk/wps/wcm/connect/TritonShowers/Internet/index.html

 

[shazzybabe]

Hi,
there is a pressure valve which has to be replaced is set off, but this is still intact and unset. There is no info about a thermal valve in the book.