Hi Chaps, currently re-wiring a house with an overhead supply and TT (well now there is).
DNO are coming tomorrow to hopefully supply PME.
Now would like peoples opinions on this part.
There is a 16mm SWA to the out house 45m away, what I am trying to decide is whether to:
1) place this on an unprotected way, with a 40A RCBO to a board with 100A main switch
or
2) Henley block to fused switch to RCD garage CU.
Like your thoughts on this as it is the ONLY TT system I have had to work on thus far and I know some of you have a lot of experience on them
Thanks in advance
DNO are coming tomorrow to hopefully supply PME.
Now would like peoples opinions on this part.
There is a 16mm SWA to the out house 45m away, what I am trying to decide is whether to:
1) place this on an unprotected way, with a 40A RCBO to a board with 100A main switch
or
2) Henley block to fused switch to RCD garage CU.
Like your thoughts on this as it is the ONLY TT system I have had to work on thus far and I know some of you have a lot of experience on them
Thanks in advance