- Joined
- 19 Feb 2005
- Messages
- 38
- Reaction score
- 0
- Country
6mm2 main earth, TN-S, 100a BS1361 main fuse, 1610A measured fault current.
I tried this on the adiabatic equation, and compared to fuse curve and it seems to just be large enough. However I've been known to make mistakes! Can anyone confirm if this seems correct please? (I used 115 for k but not sure if this is correct either)
I tried this on the adiabatic equation, and compared to fuse curve and it seems to just be large enough. However I've been known to make mistakes! Can anyone confirm if this seems correct please? (I used 115 for k but not sure if this is correct either)