Just in the process of beginning work splitting my large bathroom ito a smaller one, and a bedroom.
In the part that is to be a bedroom is the ex airing cupboard, with the old immersion heater supply still live.
My plan is if possible to split the ring into 2, one for down, one for up but dont know yet if this will be easy to acheive.
If not i want to know if its acceptable to use the immersion heater circuit to put 3 x double sockets on for the new bedroom, and if so would i need to add an FCU? there is already a 16A rcd in the consumer unit.
the existing wire is 2.5mm Twin & Earth.
In the part that is to be a bedroom is the ex airing cupboard, with the old immersion heater supply still live.
My plan is if possible to split the ring into 2, one for down, one for up but dont know yet if this will be easy to acheive.
If not i want to know if its acceptable to use the immersion heater circuit to put 3 x double sockets on for the new bedroom, and if so would i need to add an FCU? there is already a 16A rcd in the consumer unit.
the existing wire is 2.5mm Twin & Earth.