- Joined
- 22 Jan 2007
- Messages
- 8,323
- Reaction score
- 4,163
- Country
Being that the OP hasent made a post in over 2 years I doubt you will find out.
Always gets me when folk complain about heat only boilers, running 28kw boiler through a 4kw cylinder coil. I've been called to many of these over the years, and very few of them will have correctly sized pipes/pumps/rads/cylinder coils. Very often haveing a far lower flow rate through the boiler than what is stated in the installation instructions as the minimum flow rate.
Always gets me when folk complain about heat only boilers, running 28kw boiler through a 4kw cylinder coil. I've been called to many of these over the years, and very few of them will have correctly sized pipes/pumps/rads/cylinder coils. Very often haveing a far lower flow rate through the boiler than what is stated in the installation instructions as the minimum flow rate.