Hi all,
Been having a few issues with my Ecomax recently, mainly down to my ignorance on servicing.
Anyway the boiler has now been serviced (professionally), and was working fine until recently where it gave up the ghost and displayed F.0 (which I've never had before (previously I was dealing with F.24 mainly due to sensor issues).
Now I've recently replaced 2 NTC sensors based on the feedback from my previous thread... seem I missed one though as there was a 3rd hidden away, so I'm hoping that's the culprit.
I've also just replaced the wiring loom (this needing doing, but for clarity the fault displayed before I replaced it, as well as the cable itself that goes to this 3rd NTC sensor), so it's definitely not a cable fault.
I'm just wondering before I get my hopes up on replacing the remaining NTC, is there anything else this could be?
Pressure is good, and can see nothing else obviously wrong (bar a small drip leak from the connection which has holds the filter which I'll be addressing at the same time as replacing this NTC).
Thanks!
Been having a few issues with my Ecomax recently, mainly down to my ignorance on servicing.
Anyway the boiler has now been serviced (professionally), and was working fine until recently where it gave up the ghost and displayed F.0 (which I've never had before (previously I was dealing with F.24 mainly due to sensor issues).
Now I've recently replaced 2 NTC sensors based on the feedback from my previous thread... seem I missed one though as there was a 3rd hidden away, so I'm hoping that's the culprit.
I've also just replaced the wiring loom (this needing doing, but for clarity the fault displayed before I replaced it, as well as the cable itself that goes to this 3rd NTC sensor), so it's definitely not a cable fault.
I'm just wondering before I get my hopes up on replacing the remaining NTC, is there anything else this could be?
Pressure is good, and can see nothing else obviously wrong (bar a small drip leak from the connection which has holds the filter which I'll be addressing at the same time as replacing this NTC).
Thanks!