Can someone help.
My daughters CH system is strange. The heating side works fine. The pressure on the gauge at the front is 1.0 bar. The hot water is the problem.
It takes her over an hour to run a reasonable size bath. The hot water seems to trickle out. Does this mean that the hot water flow rate has not been set correctly. If so, how is this done.
Any help would be much appreciated, before I rip the thing off the wall and throw it in the back yard.
My daughters CH system is strange. The heating side works fine. The pressure on the gauge at the front is 1.0 bar. The hot water is the problem.
It takes her over an hour to run a reasonable size bath. The hot water seems to trickle out. Does this mean that the hot water flow rate has not been set correctly. If so, how is this done.
Any help would be much appreciated, before I rip the thing off the wall and throw it in the back yard.