I have posted before but the problem seems to have spread itself onto the Central Heating too.
When any hot water has been ran through heating or DHW the boiler wants to wait until it cools completly (20 degrees) down before it wants to fire up and tonight was the final straw........I had to wait for ages even when cold before the gas ignition occured.
I have been told to look into the air pressure switch through a GS engineer but really wanted to have some backup info from anyone as we are not willing to get an engineer to look at it to tell us we need something that we deffinalty dont.
I have replaced the diaphram on the cold water and both of the micro switches operate perfectly.
Is there anything i can check or do before i get an engineer to look at it.
Please help anyone
When any hot water has been ran through heating or DHW the boiler wants to wait until it cools completly (20 degrees) down before it wants to fire up and tonight was the final straw........I had to wait for ages even when cold before the gas ignition occured.
I have been told to look into the air pressure switch through a GS engineer but really wanted to have some backup info from anyone as we are not willing to get an engineer to look at it to tell us we need something that we deffinalty dont.
I have replaced the diaphram on the cold water and both of the micro switches operate perfectly.
Is there anything i can check or do before i get an engineer to look at it.
Please help anyone
