- Joined
- 2 Jan 2013
- Messages
- 3
- Reaction score
- 0
- Country
My hot water from my boiler is only reaching 30-32 deg C. The boiler is roughly 5years old, I have had a new 3 port valve overhaul kit put on and the valve actuator replaced, my gas rate is 2.5m3/hr and burner pressure is at 8.8mbar which are both correct as per manufacturers instructions. There is no hot water going down the c/h pipes and the burner stays continuously lit whilst the hot tap is open, could really do with a point in the right direction here as I've run out of options, thanks!!!!![/b]