Help! My Hotpoint Aquarius has finished a 40 cycle and the door won't open. I can't see any water inside. I have taken the waste water pipe out and put it flat on the floor nothing came out! I have also tried starting it again on various programes but nothing happens. HELP!!! ![Crying :cry: :cry:](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
OK now I have tried removing the panel on the bottom of the back. A little bit of water came out of the waste hose. I tried to set the machine to spin and hey presto
the spin started and finished but... the door still won't open.
I wouldn't normally be so worried but the washing inside is a sleeping bag belonging to my daughters best mate (our puppy wet on the sleeping bag last night - I don't normally take in extra washing!!) And she is due to be picked up at any time. Help please. ![Oops! :oops: :oops:](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
OK now I have tried removing the panel on the bottom of the back. A little bit of water came out of the waste hose. I tried to set the machine to spin and hey presto